top of page

Nitrogen Tyre Inflator

Nitrogen Generator and Conversion System for Single Tyre Application


Nitrogen generator and Conversion System for Single Tyre Application

Technical Data Summary :

Dimensions (Height*Width*Depth)                     1255mm*720mm*435mm
Net Weight                                                          89kg/196.2lbs
Gross Weight                                               
Packing Size (Height*Width*Depth)   
Power Requirement                                 
          100-240Vac 50/60HZ
Power Consumption                 
Operating Temperature Range       
                    -20ºC/-4ºF to 70ºC/158ºC
Compressed Air Input Range   
Compressed Air Input Flow               
                 250L(min) (8.0cfm)
Nitrogen Purity                                     
Nitrogen Output                     
                             58L/min (2.0cfm)@116PSI/8bar/800kPa
              Absorption pressure
Maximum Nitrogen Pressure in Tank     
Operating Range                 
Unit of Measurement                   


1. Generates nitrogen from your compressed air
2. 2 Pre-Filters
3. 50L/13.2gal (us) internal nitrogen storage tank
4. Auto-start inflation 
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11. 1 Nos. *10M/32.8ft standard hose with single clip-on open type chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen Purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. Auto Shut-Off
19. 1 Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun

Operation Steps

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose to tyre valve stem.
3. FOR TOP-OFF ONLY : Push the “FILL/PURGE” button once.
    FOR NITROGEN CONVERSION : Push and hold the “FILL/PURGE” button for 2 seconds unit the LCD screen shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure tyre inflation is complete.

  • Converts the tyre to nitrogen at the touch of a button 

  • Auto-Start Inflation 

  • Over Pressure Setting (OPS)

  • Single Tyre Application

  • Suit for : Motorcycle, Car

แผนก  Pneumatic


Email :

โทรศัพท์ : 02-726-8000 ต่อ 517-519

Line-PNE_Artboard 38.png
bottom of page