top of page

Nitrogen Tyre Inflator

High Pressure Nitrogen Generator and Conversion System for 6 Tyres Simultaneous Inflation


High Pressure Nitrogen Generator and Conversion System for 6 Tyres Simultaneous Inflation

Technical Data Summary :

Dimensions /Width         

                                       Main Body                    Tank
         1310mm/51.6”              1100mm/43.3”
      730mm/28.7”                400mm/15.7”
        620mm/24.4”                400mm/15.7”
Net Weight       
              170kg/374.8Ibs             38kg/83.8lbs
Gross Weight         
        207kg/456.4Ibs             42kg/92.6lbs


Packing Size                   

                                       Main body                     Tank 
             1450mm/57.1”              1180mm/46.5”
          730mm/28.7”                440mm/17.3”
            670mm/26.4”                440mm/17.3”   


Power Requirement                                             100Vac/240Vac 50/60HZ,
Power Consumption                                     
Operating Temperature Range               
            -20ºC/-4ºF to 70ºC/158ºC
Max Inlet Compressed Air Supply                 
Compressed Air Input Flow                   
             1100L/(min) (39.0cfm)
Nitrogen Purity                                     
Nitrogen Output                                           
       228L/min (8cfm)@116PSI/8bar/800kPa Absorption pressure
Maximum Nitrogen Pressure in Tank       
           44PSI/3.0bar/300kPa less than the Inlet Compressed Air Supply 
Maximum Operating Pressure                            12PSI/0.8bar/80kPa less than the Nitrogen pressure in Tank
Minimum Operating Pressure       
Over Pressure Setting Range                     
Nitrogen Purges                                             
Inflator Accuracy                                     
Units of Measurement                               


1. Generates nitrogen from your compressed air
2. 2 Pre-Filters
3. 118L/31.1gal (us) external nitrogen storage tank
4. Auto-start inflation 
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11. 4 Nos. *8M/26ft standard hoses with single clip-on closed chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen Purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. 6 air outlets allow simultaneous inflation of up to 6 tyres
19. Auto Shut-Off
20. 1 Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun
21. Options available :



Operation Steps

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose(s) to tyre valve stem.
3. FOR TOP-OFF ONLY : Push the “FILL/PURGE” button once.
    FOR NITROGEN CONVERSION : Push and hold the “FILL/PURGE” button for 2 seconds unit the LCD screen       

    shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure tyre inflation is complete.

  • 118L/31.1gal (us) tank can be customised to 2pcs 14.5L/3.8 gal (us) tanks

  • No tank for the unit to inflate 8bar/116PSI/800kPa or below pressure tyre/s

  • 145PSI/10bar High nitrogen pressure make the unit a fit for almost any size automotive sevice facility **

  • Save 70% time than single tyre inflation

  • Converts up to 6 tyres to Nitrogen simultaneously at the touch of a button **

  • Fully automated, fully programmable, micro-processor controlled conversion system

  • Suit for : Car, Light Truck, Bus

แผนก  Pneumatic


Email :

โทรศัพท์ : 02-726-8000 ต่อ 517-519

Line-PNE_Artboard 38.png
bottom of page