top of page

Nitrogen Tyre Inflator

High Pressure Nitrogen and High Flow Nitrogen Generator and Conversion System


High Pressure Nitrogen and High Flow Nitrogen Generator and Conversion System

Technical Data Summary :

Dimensions /Width       

                                       Main Body                    Tank
  1310mm/51.6”              1100mm/43.3”
        730mm/28.7”                400mm/15.7”
               620mm/24.4”                400mm/15.7”
Net Weight           
         170kg/374.8Ibs             38kg/83.8lbs
Gross Weight         
        207kg/456.4Ibs            42kg/92.6lbs


Packing Size                   

                                       Main body                    Tank 
             1450mm/57.1”              1180mm/46.5”
      730mm/28.7”                440mm/17.3”
            670mm/26.4”                440mm/17.3”   


Power Requirement                                            100Vac/240Vac 50/60HZ.
Power Consumption                                       
Operating Temperature Range                     
      -20ºC/-4ºF to 70ºC/158ºC
Max Inlet Compressed Air Supply               
Compressed Air Input Flow                     
          1100L/(min) (39.0cfm)
Nitrogen Purity                                           
Nitrogen Output                                     
             228L/min (8cfm)@116PSI/8bar/800kPa Absorption pressure
Maximum Nitrogen Pressure in Tank           
      44PSI/3.0bar/300kPa less than the Inlet Compressed Air Supply 
Minimum Operating Pressure                            12PSI/0.8bar/80kPa less than the Nitrogen pressure in Tank
Minimum Operating Pressure                   
Over Pressure Setting Range                   
Nitrogen Purges                                           
Inflator Accuracy                                                 ±1PSI/0.07bar/7kPa
Units of Measurement                                 


1. Generates nitrogen from your compressed air
2. 2*2 Pre-Filters
3. 118L/31.1gal (us) external nitrogen storage tank
4. Auto-start inflation 
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11. 4 Nos. *8M/26ft standard hoses with single clip-on closed chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen Purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. 6 air outlets allow simultaneous inflation of up to 6 tyres
19. Auto Shut-Off
20. 1 Nos. Nitrogen Outlet to connect the unit and your tyre inflation gun/your spay gun
21. Options available :




Operation Steps

1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose(s) to tyre valve stem(s).
3. FOR TOP-OFF ONLY : Push the “FILL/PURGE” button once.
    FOR NITROGEN CONVERSION : Push and hold the “FILL/PURGE” button for 2 seconds unit the LCD screen

    shows “N2P”.
4. When unit “beeps” and the LCD screen flashes the target pressure tyre inflation is complete.

  • 118L/31.1gal (us) tank can be customised to 2pcs 14.5L/3.8 gal (us) tanks     

  • No tank for the unit to inflate 8bar/116PSI/800kPa or below pressure tyre/s

  • High Output, can inflate a 12.00R22.5 tyre from zero to 120PSI/8.2bar/820kPa in only 2.9 minutes

  • Converts up to 6 tyres to Nitrogen simultaneously at the touch of a button **

  • Fully automated, fully programmable, micro-processor controlled conversion system

  • Suit for : Light Truck, Bus

แผนก  Pneumatic


Email :

โทรศัพท์ : 02-726-8000 ต่อ 517-519

Line-PNE_Artboard 38.png
bottom of page