top of page
QR-PNE.png

Automatic Tyre Inflator

High Flow Automatic Digital Tyre Inflator

Picture1.png
E-0124-OPS 2.png

High Flow Automatic Digital Tyre Inflator

Technical Data Summary :

Dimensions (Height*Width*Depth)                     510mm*230mm*120mm
                                                             
             20.1’’*9.1’’*4.7’’
Net Weight                                                     
    6kg/13.2lbs
Gross Weight                                         
           14.5kg/32lbs
Packing Size (Height*Width*Depth)       
           200mm*580mm*480mm
                                                                   
       7.9’’*22.8’’*18.9’’
Power Requirement                                   
       100-240Vac 50/60HZ
Power Consumption                           
               23VA
Operating Temperature Range                           -20ºC/-4ºF to 70ºC/158ºC
Max Inlet Air/Nitrogen Supply                 
           217PSI/15bar/1500kPa
Operating Range                                                5.174PSI/0.3-12bar/35-1200kPa
Over Pressure Setting Range                 
          0.29PSI/0-2.0bar/0-200kPa
Accuracy                                                
           ±1PSI/0.07bar/7kPa
Resolution                                                          1PSI/0.1bar/5kPa
Units of Measurement                                        PSI/bar/kPa

 

Specifications :

  1. Adjustable over pressure setting(OPS)

  2. 4 air outlets allow simultaneous inflation of up to 4 tyres

  3. Auto-start inflation

  4. Automatic zero drift adjustment

  5. Remain at last setting

  6. Comprehensive diagnostics and error reporting

  7. Audible and visual end of the cycle signal indicators

  8. Large backlight LCD display

  9. Vandal resistant mechanical switches

  10. Suits standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor

  11. 4 Nos. *8M/26ft standard hoses with single clip-on closed chuck

Operation Steps :

  1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

  2. If using OPS option, set OPS pressure.

  3. Connect air hose(s) to tyre valve stem(s).

  4. Push the ‘’FILL’’ button once.

  5. When unit ‘’beeps’’ and the LCD screen flashes the target pressure tyre inflation is complete.

  • Inflate up to 4 tyres simultaneous could save 60% time than single tyre inflation 

  • Fully automated, fully programmable, micro-processor controlled conversion system

  • Over Pressure Setting (OPS)

  • Suit for : Car, Light Truck, Bus 

แผนก  Pneumatic

 

Email : sales.pne@pneumax.co.th

โทรศัพท์ : 02-726-8000 ต่อ 517-519

Line-PNE_Artboard 38.png
bottom of page