top of page

Automatic Tyre Inflator

Wall-Mounted Automatic Digital Tyre Inflator

14 (E-07-OPS, E-07-WP-N)-01.png
14 (E-07-OPS, E-07-WP-N)-01.png
14 (E-07-OPS, E-07-WP-N)02-01-01.png
14 (E-07-OPS, E-07-WP-N)02-01-01.png

Wall-Mounted Automatic Digital Tyre Inflator

  • Rugged and durable diecast aluminium enclosure

  • Fully automated, fully programmable, micro-processor controlled conversion system

  • Suit for : Car, Light Truck 

Technical Data Summary :


Dimensions (Height*Width*Depth)                     290mm*230mm*120mm
Net Weight                                                 
Gross Weight                           
Packing Size (Height*Width*Depth)         
Power Requirement                           
                100-240Vac 50/60HZ
Power Consumption                                     
Operating Temperature Range                 
         -20ºC/-4ºF to 70ºC/158ºC
Max Inlet Air/Nitrogen Supply         
Operating Range                                   
Over Pressure Setting Range           
                E-07 - OPS : 0-29PSI/0-2.0bar/0-200kPa
                                                                           E-07 - WP-N : NO
Units of Measurement                                 


Specifications :

  1. E-07 - OPS : Adjustable over pressure setting(OPS)

  2. Auto-start inflation

  3. Automatic zero drift adjustment

  4. Remain at last setting

  5. Comprehensive diagnostics and error reporting

  6. Audible and visual end of the cycle signal indicators

  7. Large backlight LCD display

  8. Vandal resistant mechanical switches

  9. Suits standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor

  10. 1 Nos. *10M/32.8ft standard hose with single clip-on open type chuck

  11. Options available :

Operation Steps :

  1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

  2. E-07-OPS : If using OPS option, set OPS pressure.

  3. Connect air hose to tyre valve stem(s).

  4. When unit ‘’beeps’’ and the LCD screen flashes the target pressure tyre inflation is complete.

  5. If tyre has zero pressure, and when using the OPS function, the “FILL” button must be pressed to commence inflation.

  • Operating range : 5-174PSI/0.3-12bar/35-1200kPa

  • Remove E-07-OPS ON/OFF switch

แผนก  Pneumatic


Email :

โทรศัพท์ : 02-726-8000 ต่อ 517-519

Line-PNE_Artboard 38.png
bottom of page