Pneumatic Vibrator | อุปกรณ์สร้างแรงสั่น Findeva
top of page

Pneumatic Vibrator : Findeva

       Findeva is known as the world's leading manufacturer of pneumatic vibrators and as a pioneer in the use of aluminium housings. The simple mechanical design of the Findeva vibrators with only a few moving parts leads to a high level of operating safety and reliability, long service life and only a little and, in some cases, no maintenance.

 

       Findeva vibrators are designed so that they can be installed and removed again quickly. A large number of different models and different sizes ensures you uncompromising operation in virtually every sector.

Picture11.png

Ball Vibrators K

Ball vibrators, simple and good.

Wide range for many applications.

The Ball Vibrator K-Series

This is the simplest version of all vibrators and has been used for half a century. A steel ball driven by air rotates on hardened steel races and creates unbalance and vibration in a sinusoidal energy wave. The rotating frequency varies from 7,000 to 35,000 r.p.m. depending on the model and pressure supplied. The centrifugal force varies from 130 N up to 4,000 N, and the air consumption changes according

  Properties

  • Powerful

  • Rated frequency 7’300 – 35’000 rpm

  • Centrifugal force 130 – 4’050 N

  • Continuously variable

  • Can be used up to 100  ํC

  • HT version up to 150  ํC on request

  Field of application

  • Emptying of bunkers

  • Screen filters

  • Vibrating tables

  • Preventing adhesions in pipelines and silos

  • Moving of goods

  Construction

  • Vibration by means of a ball that is guided by hardened steel guides.

  • Nylon plates on both sides to support the ball and as protection from dust and water.

  • Housing with 4 mounting bores, depending on the application.

001.png
Picture12.png

Roller Vibrators DAR

Roller vibrators, especially for concrete and other

Heavy-duty applications. Wide range.

The Roller Vibrator DAR-Series

 

he DAR-series roller vibrators complement our existing range of roller vibrators and are especially suited for concrete applications. The new design features provide a more robust vibrator, suitable for use under the most arduous conditions. The rotating frequency varies from 8,000 to 38,000 r.p.m. depending on model and air supply pressure. The centrifugal force varies from 1,700 N up to 12,000 N. The vibration amplitude is extremly large compared to the other series.
 

  Properties

  • High torque

  • Rated frequency 7’800 – 38’000 rpm

  • Centrifugal force 1’680 – 12’000 N

  • Continuously variable

  • Can be used up to 150 ํC

  • Resistant to extreme environmental  conditions

  Field of application

  • Compacting of plastic and concrete

  • Assisting the flow of material in silos and hoppers

  • Separating of different sized products on sieves

  Construction

  • Vibration through rotating precision rollers in highly in highly flexible steel guides

  • Reinforced by two extra-shockproof bronze and plates

002.png
Picture13.png

Golden Turbine GT

High speed and eccentric working torques for strong Vibration. Wide range.

The Golden Turbine Vibrator GT-Series

 

A low to high speed range and eccentric working moments are combined in this vibrator series to produce a powerful vibration. The rotating frequency varies from 5,600 to 46,000 r.p.m. depending on model and air supply pressure. The centrifugal force varies from 1,000 up to 12,000 N.
 

  Properties

  • Lubrication-free

  • Low noise level

  • Strong vibration by means of high speed and eccentric working torques

  • Rated frequency 6’000 – 46’000 rpm

  • Centrifugal force 130 – 12’000 N

  • Continuously variable

  • Can be used up to 150 ํC

  • Resistant to extreme environmental conditions

  Field of application

  • Emptying of bunkers

  • Screen filters

  • Vibrating  tables

  • Preventing adhesions in pipelines  and silos

  • Transporting  of fine powders

  • Moving of bulk materials

  Construction

  • Vibration from the centrifugal force of positive and negative imbalanced torques in the rotor.

  • Rotor on two pre-lubricated and enclosed ball bearings arranged in pairs. Lubricated with special grease for long life.

002.png
Picture16.png

Stainless Turbines GTRF

Pneumatic turbine vibrators made of stainless – steel.

The Stainless Steel Pneumatic Turbine Vibrator GTRF-Series

 

A low to high speed range and eccentric working moments are combined in this vibrator series to produce a powerful vibration. The rotating frequency varies from 14,000 to 37,000 r.p.m. depending on model and air supply pressure. The centrifugal force varies from 750 up to 5,700 N. for foodstuffs and pharmaceutical

  Properties

  • Lubrication – free

  • Low noise level

  • Strong vibration by means of high speed and eccentric working torques

  • Rated frequency 14’000 – 37’000 rpm

  • Centrifugal force 750 – 5’700 N

  • Continuously variable

  • Can be used up to 150  ํC

  • Resistant to extreme environmental conditions

  Field of application

  • For foodstuffs and pharmaceuticals, complies with  FDA specifications

  • Emptying of bunkers

  • Screen filter

  • Vibrating tables

  • Preventing adhesions in pipelines and silos

  • Transporting of fine powders

  • Moving of bulk materials

  Construction

  • Vibration from the centrifugal force of positive and negative imbalanced torques in the rotor.

  • Rotor on two pre-lubricated and enclosed ball bearings arranged in pairs.

  • Made from stainless-steel 316 and lubricated with special grease for long life.

002.png
QR-PNE.png

แผนก  Pneumatic

 

Email : sales.pne@pneumax.co.th

โทรศัพท์ : 02-726-8000 ต่อ 517-519

Line-PNE_Artboard 38.png
bottom of page