Automatic Tyre Inflator

Pedestal Automatic Digital Tyre Inflator

Picture1.png
E-012-OD.png
E-012-OD.png
E-012-OD-WP-N.png
E-012-OD-WP-N.png

Pedestal Automatic Digital Tyre Inflator

  • 174PSI/12bar/1200kPa output pressure make the unit a fit for almost any size automotive service facility 

  • Rugged and durable diecast aluminium enclosure for inflator head

  • Fully automated, fully programmable, micro-processor controlled conversion system

  • Suit for : Car, Light Truck, Bus*

Technical Data Summary :

  

Dimensions(Height*Width*Depth)                     1260mm*360mm*360mm
                                                                   
       49.6"*14.2"*14.2"
Net Weight                                                   
     17.5kg/38.6lbs
Gross Weight                                             
       21kg/44.6lbs
Packing Size(Height*Width*Depth)           
        225mm*1290mm*400mm
                                                         
                 8.9"*50.8"*15.7"
Power Requirement                                     
     100-240Vac 50/60HZ
Power Consumption                               
           23VA
Operating Temperature Range           
               -20°C/-4°F to 70°C/ 158°F
Max Inlet Air/Nitrogen Supply                       
    217PSI/15bar/1500kPa
Accuracy                                                   
        ±1PSI/0.07bar/7kPa
Resolution                                           
              1PSI/0.1bar/5kPa
Units of Measurement                   
                    PSI/bar/kPa

 

Specifications :

  1. Auto-start inflation

  2. Automatic zero drift adjustment

  3. Remain at last setting

  4. Comprehensive diagnostics and error reporting

  5. Audible and visual end of the cycle signal indicators

  6. Large backlight LCD display

  7. Vandal resistant mechanical switches

  8. Suits standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor

  9. 1 Nos. *10M/32.8ft standard hose with single clip-on open type chuck

  10. Options available:

Operation Steps :

  1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.

  2. Connect air hose to tyre valve stem.

  3. When unit “beeps” and the LCD screen flashes the target pressure tyre inflation is complete.

  4. If tyre has zero pressure, the “FILL” button must be pressed to commence inflation.

  • Stainless steel cabinet       

  • Additional heater     

  • Additional water tap       

  • OPS function is available       

  • Remove E-012-OD ON/OFF switch

แผนก  Pneumatic

 

Email : sales.pne@pneumax.co.th

โทรศัพท์ : 02-726-8000 ต่อ 517-519